Raj Blend Indian Sandstone Circles

Cleaning Indian sandstone is simple. Use soapy water and a stiff brush or hose. For tougher stains as well as moss and algae, we recommend using New Clean 60 available from our website. Apply as directed with a sprayer and leave on for around 60 minutes then wash off with a stiff brush or power washer to ensure you have removed all dirt and debris as well as any cleaner residue. For further reading please follow the link to our tech guide

Outdoor Maintenance Guide

Very basically all Indian Sandstone paving should be laid on a full wet bed of mortar over a compacted hardcore or concrete base, deep enough for the site conditions. We have a great deal more information available on our natural stone paving installation guide that can be found at the link below:

Outdoor Installation Guide

All Indian sandstone paving can be stained these stains can be more, or less, visible depending on the colour of the stone. We would always recommend sealing your stone directly after installation, cleaning up spillages immediately and keeping to a regular maintenance routine. If after a few years you find that your sandstone has become quite heavily stained, we would recommend using a heavy-duty natural stone cleaner such as New Clean 60 from Universal Sealants.

Indian sandstone as with all natural stones are susceptible to discolouration and damage from acid rain. This is an unavoidably realty of living in the modern world, but these affects will take quite some considerable time, normally many decades, to manifest themselves as damage on your patios surface. There is very little point worrying about this, as there is nothing that can be done to avoid it. We would always recommend regularly sealing and undertaking regular maintenance of your paving, to minimise these effects and to keep it looking good for as long as possible

All natural stones will fade over time when exposed to the UK climate and Indian sandstone is no exception. Sandstone will slowly fade over the years losing some of the vibrance of the original colour but if regularly maintained will keep its original colour for many years without any visible change to the surface of the stone.

We recommend undertaking regular maintenance to keep your patio looking at its best, but at the same time let nature take its course and enjoy the process of weathering that all natural stone goes through.

We would recommend that you seal Indian sandstone paving directly after installation. Ensure that you use a water based impregnating sealer that will still allow the stone to breath and for the natural process of efflorescence to take place. Sealing should take place only when the stone is completely dry and there is at least 24 hours of dry weather ahead. This will allow the sealant to cure properly after application. Sandstone is a naturally porous material, and it must be maintained, or you can cause damage to the surface of the stone.

Indian sandstone is an excellent paving material and makes the perfect patio. It has excellent frost resistance. It is hard wearing and affordable, making it one of the best natural paving materials available.

Indian sandstone works perfectly in a wide range of landscaping applications from a contemporary minimalist garden to a traditional cottage garden. It offers a wide range of colour and finishes. There is something for all style preferences.

Indian Sandstone paving like most types of natural stone paving has a degree of porosity which essentially means it’s permeable. Indian sandstone paving is an excellent material for all landscaping applications from patios to driveways, however its porosity means it does need to be sealed after installation. Always use a good quality impregnating sealant that is specifically formulated for natural stone. Without sealing Indian sandstone can start to look worse for wear after a few years and will require increased maintenance to keep it looking at its best.

In general sandstone paving is not slippery if it is well maintained. There are a great deal of finishes available in this material, each with different natural slip resistances. The natural riven surface of hand split sandstone paving has the best slip resistance. This slip resistance reduces as the surface of the sandstone becomes smoother, such as honed or polished.

Different types of Indian sandstone and their slip resistance:

Riven – excellent slip resistance

Honed – average slip resistance

Polished – low slip resistance (Only possible on very hard, less porous stones).

Yes, we recommend you seal all sandstone and natural stone paving upon (or shortly after) installation, to ensure it stays looking at it’s best for longest. Sealing will help make it resilient to staining and increases it’s longevity. We recommend Universeal Hydroseal or for an enhanced look Universeal Ultimate Stone Enhancer

Yes. Our opening hours and address are found on the Contact Us page. We have fork-lift trucks for loading onto suitable vehicles at all sites, and staff are always available to help with loading of smaller items. We highly recommend that you call your local branch, before visiting, to confirm the items you wish to collect are available.