Mountain White Porcelain 900 x 600

As a rule no porcelain paving slabs do not fade, but over very long periods of time in sunny areas and with considerable weathering you could expect to see some slight changes to the appearance of the surface of the slabs.

Yes, our Porcelain Paving can be cut easily, but you will require a very good quality diamond blade made especially for 20mm Porcelain paving slabs. European & Italian Porcelain paving cuts a lot better than India porcelain due to the improved production processes making them less brittle and prone to chipping, but due to its increased density, it can take longer.

Yes, it can be advisable to seal Porcelain Paving. This will further reduce porosity and keep any maintenance to an absolute minimum, but it is not essential and is basically a personal choice.

It is possible to stain Porcelain Paving but it’s very difficult due to its very low porosity. Porcelain paving can be sealed to further help prevent staining in areas prone to spillages.

No Porcelain Paving does not scratch easily, it is an extremely dense material that is very hard to damage once installed. If the surface of Porcelain is damaged or scratch it is not possible to repair, so we would also recommend keeping a couple of extra slabs hidden in your garden just in case of future problems.

Yes, Porcelain slabs are incredibly low maintenance, they have very low porosity of 0.5% minimising dirt penetration into the surface meaning in normal situations no more than a general clean will ever be necessary.

Yes we believe we offer the best possible quality Porcelain paving that will far exceed any domestic requirements and will, if correctly installed, last for decades without requiring anything but general cleaning and maintenance.

Porcelain paving is a very hard and precisely manufactured products, so some additional knowledge is needed to handle this material correctly, but any well experienced landscape contractor with the correct tools will not have any problems installing any of our products.

Porcelain paving has become very competitively priced within the UK market, with a high quality Polish or Italian Porcelain product priced competitively against inferior imported porcelain and natural stone products. We would always recommend installing the best possible Porcelain Paving slabs you can afford as the actual costs of the paving materials itself, is only a fraction of the overall installation cost, and is the thing you will be left looking at for many years to come.

All paving that is used within the UK must be R11 slip rated to meet the current British standard for paving materials. All our Porcelain Paving products have been tested and meet or exceed these standards. Technical Data Sheets are available to view for all porcelain paving products, just follow the link on the product pages.